High speed, high precision, fully automatic
Supports jet dispensing valves, screw dispensing valves, sliding dispensing valves, and precision time pneumatic valves;
Covering the dispensing requirements of all circuit board assembly and microelectronic packaging processes;
Equipment characteristics
All common dispensing commands for highly controllable points, lines, POLYLINES, arcs, circles, rectangles, circles, and 3D dynamic trajectories;
Concise calibration steps for production displacement deviation;
Comprehensive production weight control process methods;
Simple and practical programming interface;
Convenient programming and process control of dispensing process, including encapsulation, bottom filling, dam filling, fine red glue, conductive silver glue, etc;
Standard configuration
Servo driven positioning system, stepper conveyor system, vacuum suction cleaning station;
Select configuration
Servo driven positioning system, stepper conveyor system, vacuum suction cleaning station.
Technical parameter
| Model | X1 | X2 |
| type | 在线式 | |
| Typical applications | 底部填充，点红胶，包封，表面贴装，精密涂覆，半导体芯片封装等 | |
| control system | ||
| computer | 工控机+运动控制卡，液晶显示器，键盘 | |
| software | windows 7系统下开发的自主软件， 可实现点、线、圆弧、圆、周边填充等 | |
| Programming method | 示教手柄/鼠键套 | |
| drive | 伺服马达+滚珠丝杆 | |
| Sports system | ||
| positioning accuracy | ±0.02mm | |
| Repetitive accuracy | ±0.02mm | |
| Maximum movement speed | 1000mm/S (X，Y，Z) | |
| Maximum acceleration | 1g (X，Y) | |
| Visual positioning system | 工业CCD | |
| Transport system | ||
| Transport driven | 无刷直流电机+防静电皮带 | |
| Width adjustment system | 自动 | |
| Amplitude modulation speed | 250mm/min | |
| Transportation speed | 70~2400mm/min | |
| Transmission direction | L→R (R-L可选) | |
| Maximum substrate thickness | 6mm | |
| Rail bearing capacity (including fixtures) | 5.0kg | |
| Track height | 880-930mm | |
| Number of tracks | 1套 | |
| Rail dispensing range | ||
| Glue dispensing area (LxW) | 400x350mm | 200x350mm |
| Fluid part | ||
| Number of rubber valves | 1套 | 2套(可同动/可异动) |
| Rubber valve type | 喷射阀 | |
| Factory requirements | ||
| Communication interface | SME MA接口 | |
| Power | 电压AC220V，50/60HZ，10A | |
| Pressure | 气压0.4-0.6Mpa | |
| Total power | 3.0KW | |
| Total Weight | 880KG | |
| External Dimensions (LxWxH) | 850x1200x1550mm | |
| Standard configuration items | Optional items | |
| 1. Vacuum cleaning device 2. XY axis and Z-axis benchmark calibration platform 3. 10cc, 30cc, 55cc feeding devices 4. Sound and light alarm device 5. Spray head heating device 6. Jet pressure stabilization device 7. Monorail 8. Jet pressure stabilization device 9. Component body recognition function 10. Visual recognition system | 1. Low liquid level detection and alarm 2. Weighing system 0.01mg 3. Laser altimetry 4. Heating module for the track 5. Valve body channel heating device 6. 200/300cc feeding device 7. Vacuum adsorption platform | |